Aquastop - what is it in the washing machine? Features of the hose

Every washing machine is a valid source of leaks. But modern manufacturing companies have thought of a solution to this problem. The solution was a "washing machine aquastop". What it is? This device is designed to ensure the safety of your and your neighbor's apartment from unexpected problems in the form of flooding.

About the aquastop system

Causes of a washing machine leak

So-called inlet hose The washing structure can be damaged for absolutely different reasons:

• may burst;
• the possibility of being cut due to sharp corners, any objects;
• may even be spoiled by your pets.

Also, do not reset the possibility of a hose break, because you are also not immune from such a problem. your the washing machine costs nothing to flood you, it would be enough for a small crack in the fitting of the tube that leads to your washing machine.

Any problem will lead you to a large investment of time, as well as money that you will spend on repairing your own and, in the worst cases, your neighbor's apartment.

The principle of operation of the aquastop

Aquastop is presented in the form of a valve with a special spring. Such a spring instantly works depending on the pressure drop in the tube.

For example, if the aquastop system in a washing machine detects an unexpected leak, then the water that enters your washing machine at that moment is blocked in the same second. In this case, you do not even need to worry about opening / closing the tap that supplies liquid to the inlet hose of the washing machine.

One of the main features of this system is a fairly thick water supply hose that can withstand up to 70 bar, when the simplest standard plumbing can only withstand 10 bar. In this hose, the already known solenoid valve, which is also located in the washing structure itself.

Manufacturing companies have thought through the whole system to the smallest detail. The inlet hose itself is leaky, so the water goes into a special pan. There is a certain sensitive element in the pan that will instantly close all the valve contacts, which is the closing of the hose and, accordingly, the cessation of the water supply.

Also, the aquastop system can stop the supply of water to the washing machine with a rather rough and incorrectly calculated dose of detergent (powder) - this is another distinctive feature. This is due to the fact that the resulting foam, when the so-called lower tank is overfilled, will come out and overflow from this tank.In such washing machines, water pumping functions are most often present, but they can only work if the working (or emergency valve) does not fulfill its task in such a situation.

Types of aquastop for washing machines

Since then, a large number of diverse and varied valves have appeared, which differ from each other in their pros and cons:

1. The so-called instant water stop system is able to shut off the flow of liquid to the washing machine through the hose in one second - this is a UDI variety. Outwardly, this element is no different and looks like a standard threaded pipe; it can also be attached to the structure separately. All the most interesting is located inside the element. In order for this aquastop to work, it needs a sharp drop in pressure in the hose, but it will not be able to stop small water leaks.
2. Washing machine will cost more than conventional machine type devices due to pre-equipped built-in aquastop system. Such systems are simple, which are connected as standard at the bottom and turn off themselves as soon as the water is outside the drum body; with a valve that works on an automatic machine (located at the beginning of the water intake and equipped with automation, that is, it is controlled by an electric drive) that evaluates the differences in the paths in advance. The latter types are able to detect leakage in the filling hose itself. Some of these HydroStop options can be activated and controlled by radio waves (optional).
3. One of the latest developments at the moment is considered aquastop powder. In such a system, there is a special hose that is connected at one end to the washing machine, and the other to the water supply. Such a system is considered disposable - it absorbs water into itself with the help of an absorbent. All this is due to a double hose with empty walls - when a leak occurs, then all the actions take place in that space. Thus, the leak will be eliminated, the valve will shut off the water supply, however, this option should not be considered very good in terms of protection, most likely it will protect you from several holes.

How to install aquastop yourself

If you purchased a washing machine without an aquastop, then you have the opportunity to install this system yourself. We will tell you how to do it step by step:

• First you need to disconnect the washing machine from electricity and water supply;
• Next, you need to disconnect the hose that supplies water to the structure (At the same time, you can check it and if you need to replace the rubber seals (depicted in the form of rings) and also clean and flush filters coarse cleaning);
• The sensor itself must be installed on the water supply tap, and must be turned clockwise, which is important;
• Then we attach the inlet hose to the aquastop system;
• Before completing the installation work, you should make sure that everything is working and secure. This can be done by slowly letting water into the inlet hose, so you can find any problems and fix them.

Additional Flood Prevention Measures

There are other ways to prevent leaks in addition to installing special tools in the washing machine:

• For installation of leads to the technological device water pipes different material can be used. In general, it is metal-plastic or polypropylene, but there are also copper and metal pipes coated with zinc. Just the final version has the smallest time period of service (no more than 30 years). As for metal-plastic, it is better only to put it on crimping models. Polypropylene has proven itself well, but such a pipe will not withstand a powerful mechanical breakdown. Experts recommend: it is better not to miss cranes made of aluminum and fitting constructive orders. Good pressure in the system is enough for such a trifle to burst, and this will already lead to possible leaks.
• In your bathroom there is an opportunity to bed floor made of special waterproofing material. Such a move will protect you and your neighbors from below from your leaks. If this work is done very competently and correctly, then the water in such cases will itself decrease into the sewer. One can only notice the only drawback in this method is the floor level, which will rise during the installation process.
• The correct and finally sure decision will be shutting off all standing valves at a time when all the owners are not at home. This is necessary in cases where your drain hose from the washing machine is already damaged, and if water flows through any crack in the hose, then this is already a high probability of a flood at the most unexpected moment. Such a recommendation is included with every washing machine, however, many modern consumers are so confident in the health of their assistant that they simply do not read the safety points prescribed in the manual.

The aquastop system for a washing machine is a pretty powerful breakthrough in the field of add-ons for washing designs.