How to choose a semi-automatic washing machine with a centrifuge

The semi-automatic machine is still popular, despite all the advantages of the automatic washing machine.

Not everyone has the opportunity to connect washing equipment to the water supply and very often it is installed in summer cottages or in villages. Buying a semi-automatic washing machine with a centrifuge is much easier because of its low price.

Differences of a semi-automatic washing machine with a centrifuge

Semi-automatic washing machines have:

• vertical loading;
• a small number of washing programs;
• small sizes;
• quick wash;
• rare problems;
• inexpensive cost;
• simple control;
• the need for manual labor;
• the ability to wash and wring at the same time, but in different tanks (if available).

1. This model is completely does not depend on centralized water supply.
2. It will significantly save on electricity and water supply. After all, after washing white linen, you can not drain the water, but start washing dark clothes.
3. And there is the ability to add laundry to the washing machine at any time and also remove it from there.
4. Operation is very simple, since it lacks complex electronics and a large number of modes.
5. And you don't have to choose special detergents, it is ready to wash even with hand washing powder.
6. typewriter does not have a heater, so it breaks much less often.
7. And if it breaks repair will cost many times less.

By cons refers to the need for manual spin in models without this function.

Wash by efficiency is different from automatic washing machines for the worse.

If hot water is turned off, you will have to work hard and heat up by ourselves.

Types of semi-automatic washing machines

There are activator models and models differing in the number of tanks.

Yes, there may be one tank, or there may be two - one for washing, the other for spin. Activator washing machines are more common because of their advantages in economy and reliability.

An important point - the presence of a reverse. This function allows you to spin the laundry in one direction and in the other.

Another important point - the presence of the spin function. The extraction is carried out in a centrifuge.

If there is only one tank, then spinning is performed in this tankif the washing machine has two tanks, then the centrifuge is in one of them.

Of the most popular semi-automatic washing machines can be called "Fairy" domestic production of a compact size of low quality washing, but with a spin function; "Assol" with mechanical control. "Eureka" with a maximum laundry load of up to 3 kg is one of the most advanced models. It is distinguished by the possibility of step-by-step switching of actions.Washing machine "Saturn" with a depth of 36 cm can be installed in any room.

How to choose a semi-automatic washing machine

When choosing, you can focus on:

1. Wash class. It is marked with letters from A to G. The lowest class implies poor washing quality.
2. Energy class. The highest economy class is A, the more budget option is B, C.
3. Price.
4. Material. Washing machines with metal tanks the most reliable and the service life of such washing machines is long, but their cost is higher compared to washing machines with a plastic tank, which are inexpensive and practical.
5. Volume. For permanent use, you need a washing machine with a large load volume; for summer cottages, more economical and compact options are possible with a load of up to 3 kg of laundry.

Operation of semi-automatic washing machines

There is nothing difficult in the operation of a semi-automatic washing machine.

First, the water is heated for more efficient washing when using powder. Heated water is poured into the washing machine tank along with the powder. Laundry is loaded and the wash time is set.

Often there are models with a standard and delicate program, equipped with a spin function.

After the programs have been completed, the laundry is removed from the washing machine, and the used water is drained and replaced with clean water for rinsing. After the end of the washing process, when the unit is connected to the sewer, the “drain“. If not, then the water is drained into a container.

Malfunctions of washing semi-automatic washing machines

Washing machines rarely break down.

But, sometimes there are problems with the engine, it may not start.The timing relay, capacitor, transformer or starting brushes are most likely to blame for this.

Sometimes the spin does not turn on, the reason may be a broken wire. A pinched centrifuge brake can also cause problems with spinning.

How to repair a centrifuge in a semi-automatic

The problem with the centrifuge gives the owners a lot of trouble. You have to use manual labor, which can cause both physical and mental discomfort.

Cause of centrifuge failure may be:

• In the broken drive belt. To repair the semi-automatic centrifuge, you need to remove the cover of the washing machine and adjust the tension. In the event that the engine stops rotating, the power cable or sockets may be to blame in addition to the engine.
• In a malfunction related to the filling of the centrifuge with water from the tank, it indicates bypass valve problem. It is necessary to remove all the water in the disconnected washing machine and clean the valve.
• Damaged bearing or seala. In this case, the washing machine will whistle unpleasantly. You will have to buy a new bearing and centrifuge seal for a semi-automatic washing machine.
• In the failed modulewhich cannot send a command to start spinning and therefore the centrifuge does not gain momentum; the semi-automatic washing machine does not work. You will either need to reprogram the board or replace it.

It is often possible to avoid malfunctions, and if they appear, then quickly respond to them.

You should not wait and bring the semi-automatic machine to the repair of the centrifuge in the washing machine.