Leave a request if your washing machine freezes:
Washing machine stuckThe washing machine sets the time for washing depending on the mode that you select. It can be from 30 minutes to several hours. Sometimes the washing time changes slightly due to external causes, such as low water pressure in the pipes, rewinding of the laundry during washing, etc. However, if the washing machine does not wash for the 2 hours prescribed by the program, but much longer, this is a cause for concern and most likely washing machine freezes.
Installation error or pump failure
Firstly, for a long wash, you can take the so-called self-draining of water from the tank. Spontaneous draining of water from the tank of the washing machine occurs when, during its installation, all the requirements of the manufacturer were not taken into account and the drain hose is not fixed at the required height. If the water drain hose is not raised to the level of the roof of the washing machine, then water will flow from the tank into the sewer, and the washing machine will continue to draw water. This can go on for quite some time, in this case washing machine freezes due to the fact that the water level sensor does not give a command to start washing, because there is not enough water in the tank. Fix the drain hose to the height indicated in the instructions, and the problem will be solved by itself.
It also happens that the drain of water is caused by a breakdown of the drain pump. Therefore, if the drain hose is fixed correctly, the water is still leaking and gaining - only replacing the pump will help.
Blockage in the drain hose, pump filter or fittings
A blockage in the drain hose will interfere with the normal outflow of water. And since the water will flow slowly, the washing time will increase. Small items left in pockets, as well as lint, hair and threads, can clog the drain hose or filter over time, so these washing machine components must be cleaned periodically.
TEN out of order
During washing, the washing machine heats cold water to the required temperature. If the heating element starts to work intermittently, then the time to heat the water to the desired temperature increases, and washing machine freezes. The only solution in this situation is to replace the defective part.
Broken electronic module
A failure in the washing program can also be caused by a breakdown of the electronic control module. To repair electronics, it is best to call a master repairman.
Thus, when washing machine freezes, there are objective reasons for that. We have named the main ones in this article, but it is better to entrust their elimination to a professional.
Leave a request and the master will call you back:
