Leave a request and we will solve your problem:
Is the water level in the washing machine broken?
When choosing a washing machine, many today pay special attention to the washing class, i.e. on the effectiveness and efficiency of the device. In priority washing machines, which consume fewer resources such as water and electricity.
One of the main resources consumed by a washing machine is water, since all washing machine cycles are aimed at using this resource.
Water level sensor
Water level in washing machine - one of the main parameters, the calculation of which allows the washing machine to start the washing cycle without interference. The amount of water entering for washing is controlled by a level switch. This is a sensor that is active during the entire wash cycle, as controls the water level in the washing machine throughout the wash and rinse.
Taking in too much water
If you see that the water level in the washing machine is above normal, this indicates the presence faults, which include: breakdown of the water inlet valve, breakdown of the pressure switch (level sensor), incorrect installation of washing machines and low attachment of the drain hose, etc.
Troubleshooting
- Wrong installation. First of all, we check the correct installation and connection of the washing machine. The required height for fixing the drain hose is indicated in the instructions. If a drain fixed too low - the water level in the washing machine will be below normal, because. water will simply flow from the tank into the sewer, and the washing machine will constantly draw water.
- The drain valve has failed. A malfunctioning drain valve is indicated by the fact that water flows into the washing machine when it is turned off and even with the door open. In this case, water flows into the tank, because. the valve does not withstand the pressure available in the water pipes.
Sometimes this is due to a broken valve, sometimes due to a simple blockage. Replacing the valve is a simple procedure, the master will replace the part in minutes. Before the master arrives, it is important to turn off the tap on the pipe to which the washing machine is connected. Otherwise, the water will gradually fill the tank and begin to flood the room.
Weak water pressure. If the pressure in the system is low, the water level in the washing machine rises too slowly. In this case, the electronic module may generate an error. The problem with the lack of water or low water pressure is solved by the company managing and servicing the house. However, before calling the housing office, check if the water in the apartment is turned off, if the valve on the pipe is turned.
- Faulty level sensor. If water continues to pour into the washing machine tank, although the water level in the washing machine is already high enough, then the level switch is acting up. Check the sensor for serviceability and replace it if necessary. serviceman.
Keep an eye on the water level in the washing machine - this will help you notice the problem and solve it in time.
Leave a request for repair:
