Repair of malfunctions of washing machines and their varieties

Leave a request to call the master:

The washing machine is one of the main and indispensable household helpers. And if it breaks, then this is a big nuisance for the owner. Some malfunctions can be easily dealt with by yourself, and to fix some breakdowns, you will have to call a washing machine repairman. No matter what brand or model of washing machine you have Indesit (Indesit), Bosch (Bosch), Ariston (Ariston) and many others, the causes of failures can be the same.

Consider the main malfunctions of washing machines:

Washing machine won't turn on

The fact that the washing machine does not turn on may actually not be as scary as it really is. There are some possibilities and surprises:

• Loss of power or voltage.
• The plug is not inserted or is not fully inserted into the socket, or the plug is not working properly.
• The drum hatch door is not closed. When the sunroof closes tightly, you should hear a click.
• The control of the electronic system failed and stopped working. Only a specialist will help here, he will do diagnostics and fix the problem.

Washing machine leaking

If the washing machine is used incorrectly, it may cause rupture of the rubber cuff of the hatch. The sealing rubber around the circumference of the hatch may be damaged, a gap may form due to the ingress of a foreign and piercing object, or wear out. Also the reason may be:

• The drain hose is torn or the pipe is cracked.
• Outer drum failure.
• The snail of the washing machine is damaged.

Washing machine does not remove water from the drum

Since the water does not leave the drum of the washing machine, you need to look for the cause in the pump. It could be:

• Sewer drain pump clogged or malfunctioning.
• Drain filter clogged.
• Wrong washing mode selected (no spin).

To find out the contamination of the sewer, it is necessary to disconnect the drain hose from the sewer pipe, lower it into a bucket and turn on the washing machine in the water drain. If water poured out of the hose, then you have a clogged sewer that needs to be cleaned.

Washing machine does not spin the drum

You see how the drum of the washing machine did not wring out the laundry, and the things in the washing machine remained wet. Check if the washing mode is selected correctly, perhaps the no-spin mode was selected. If everything is in order in the mode, look for the reasons in:

• Drive belt defective.
• Bearing wear.
• The electronic control unit is faulty and out of order.
• The engine does not work, or it may have burned out.

Washing machine does not heat water

The main reason is the heating element of the heating element, which is out of order, i.e. burned down.Also the reason may be:

• The heating relay is not working properly and is out of order.
• The sensor showing the heating of the water has failed.

The washing machine makes extraneous noises

• Bearings are defective.
• Foreign object in the tank

Washing machine is not gaining momentum

• Foreign object in the tank.
• The electronic control unit is faulty and out of order.
• Faulty motor brushes.
• The washing machine's drive is out of order.

For long-term operation of the washing machine, it must be installed correctly, not loaded above the prescribed norm, and you cannot switch washing modes while the washing machine is running.

Leave a request for repair: