Washing machines have become so firmly established in our lives for several decades that a sudden breakdown can ruin the mood of its owner, because washing by hand is clearly not included in the plans of a modern person.
Often during the washing process, the owners of washing machines are faced with the problem that the equipment does not drain the water from the tank.
Or drains, but very slowly. Or it may be that the program simply stops during operation - it “freezes” and the water does not drain at all.
Why won't the washing machine spin and drain?
There can be several reasons why this error occurs. Let's look at them in more detail below.
Reason number 1. The drain of the system is clogged
In this situation, a drain filter is involved, since it is he who is responsible for the pump's performance, and thanks to its work, water circulates.
In order to understand that the cause of the breakdown is the drain filter, you just need to check it. Most often, small objects, villi, husks from seeds or nuts, threads remain on it, which makes it difficult to drain the water.
The node is placed in the front and lower parts by the manufacturer, taking into account the solution of this problem in an independent way. It is enough to unscrew the filter and rinse it thoroughly.
There are cases when the filter is “welded” due to high temperatures, but the problem is solvable. A specialist will be able to help, since it will be necessary to disassemble the washing machine, and the part will have to be replaced.
Regular maintenance of equipment increases its service life.
Reason number 2. The pump is out of order
For some washing machines, the drain pump is the weak link.
If the pump malfunctions, water is not pumped out, the “Spin” function cannot be turned on, or the pumping speed is very low.
In this case, when solving the problem on your own, you need to take into account the nuances, for example:
- Bosch brand washing machines are equipped with a drain pump, which is located on the front and to remove it, you need to unscrew the front panel;
- for Electrolux washing machines, the pump is accessed through the rear housing.
How to check if the pump is working?
Start checking the performance of the pump by removing the filter.- After that, you need to set the washing program to “Spin”.
- Using a flashlight, it is enough to look into the filter hole and understand how serious the situation is. There is an impeller.
- First you need to understand if it rotates well. To do this, it is enough to clean the impeller of debris, since a trifling object can cause damage.
In the case of free movement, you may need the help of a wizard who will diagnose the pump.If the option with the master disappears, then you need to understand that if the impeller does not rotate, then most likely the drain pump (pump) is out of order. Will have to replace it.
You will need to remove the drain assembly from the washing machine and detach the pump from it, carefully removing the wires. In its place, put a new part and complete the assembly of the washing machine with a test wash.
Reason number 3. The pipe is clogged
This part connects the pump and tank.
If everything is in order with the filter, and the washing machine does not drain water well, there may be a problem in the pipe.
Check if the pipe is working.
To get to it, you will have to unscrew the bolts for attaching the drain nodes.- Next, the pipe itself is taken out and the fixing clamp is removed.
- There is water in the pipe that needs to be drained.
- With a slight compression, it will be clear whether it is clogged or not.
- If you feel a blockage, then you need to get rid of it.
- After this simple procedure, the part is returned to its place.
Reason number 4. The “Spin” mode does not turn on
With this problem, the washing machine refuses to completely drain the water.
The problem most likely lies in the improper installation of the drain hose or blockages in the sewer system and siphon. As a result, water does not drain from the washing machine.
The most common cause of the problem of draining water is the problem with the drain hose.
- It is necessary to check whether it is twisted, whether it is pinched.
- It is necessary to pay attention to the height of the inflection, given the minimum value of 60 cm.
- In the event that the water from the washing machine is drained into the sewer, it is advisable to check the siphon for a blockage.
Reason number 5. Electronics failed
In the event of a malfunction, for example, of the stabilizer of the control unit, the washing machine does not receive the appropriate commands from the “brain” and therefore the water does not drain.
Before drawing a conclusion about a malfunction of the electronics of the washing machine, you need to make sure that “Spin” is really included in this washing program.
If yes, then perhaps the system has failed and it is enough to reboot it. To do this, unplug it and plug it back in. If it does not help, then the problem cannot be solved without a service center. This is a more complex malfunction, which, if not professionally solved, is dangerous.
Self repair
It is quite possible to unwind the drain hose on your own or cope with cleaning the drain filter and the pump impeller. But, if there is any doubt about the correctness of this solution to the problem with the washing machine, it is more advisable to contact the service center, where the issue will be resolved quickly and professionally.
This approach will allow your device to serve you for a long time without interruption.
How to prevent breakage? Prevention
To avoid trouble when operating the washing machine, follow the small rules:
- Before washing, you need to make sure that there are no coins, buttons, stones, pieces of paper, etc. in the pockets of clothes.
- Do not forget that the condition of the sewer and drain hose also affects the blockage.
- Regular care of the filter will protect the drain pump, which is undoubtedly an important part of the washing machine.
