When you throw clothes into the wash, set the program, press Start, it happens that the washing machine freezes ... it also happens that the washing machine takes too long to wash ... or suddenly does not turn off ...
There may be several reasons for this. We monitor the execution of the program. We analyze the main ones:
- If the process is delayed set of water, and because of this, the washing machine takes longer to wash, and this happens, it is likely that the washing machine is working, but there is no water supply, the tube is pinched or the water supply valve is covered. Check this moment.
- The same process can be delayed due to clogged filters or suction tube, this problem makes the water flow weak. Clean the filters and meshes yourself, but contact a specialist.
- The set of water can also be long if the water supply valve is faulty. In this case, water simply stops flowing into the washing machine or very little if the diffuser is not fully open. To resolve this problem, contact the inlet valve for replacement.
- The washing machine washes longer, delaying time water drain? The main reason for this may be clogging of the drain membranes or clogging of the pipe. The filter, of course, can be washed and cleaned by yourself, and the blowing of the hoses should be entrusted to the master.
- It happens that the unit does not start washing, but refills and pours out water.There is a possibility of incorrect connection to the sewer, with this problem, the water from the washing machine drains itself and is collected again. Why does the washing machine wash for a long time with such a malfunction? Water does not have time to heat up to the desired temperature. You should contact a specialist for the correct connection.
- The same malfunction occurs when the water filling sensor (pressure switch) fails. The machine does not receive information that the water level is sufficient, so it is collected and drained again.
- Water is drawn in and drained again due to failures of the water inlet gate. Bosch washing machine most often erases for a long time for this reason. This valve will need to be replaced.
- Washing may be delayed in the process water heating. The main reason for this is most often a strong scale on the heating element and it needs to be cleaned.
If the heating sensor malfunctions, incorrect data is sent to the “brain” of the washing machines, while the heating process increases. A new thermostat is needed.- If during heating the washing machine stops or gives an error, this means that the heating element has burned out.
- If the “freeze” occurs periodically, and then the washing continues, the problem is in the failure of the electrical module or programmer. Exit: replacement or repair of the control board. (prices are here)
- It is also possible that you experienced a power failure and the control module of the washing machine could burn out, for this reason, repair or replacement of the “brains” of the washing machine is required.
If you notice that the washing machine washes for a long time, freezes, makes strange sounds, contact a highly professional master right now!
