How to Easily Deal with a Dirty Washing Machine Tray Without Acid
A washing machine is an indispensable tool for any family. We use her services almost every day. Like any piece of equipment, it needs care and proper maintenance.
Some notice this when something goes wrong with the washing machine. They start reading and looking online for possible causes.
One of the problems that anyone can have is a dirty laundry detergent tray.
General information
This problem can be seen with the naked eye. The tray can be covered with limescale, rust, mold. An unpleasant smell of rot or mustiness may accompany these signs.
All this can lead to breakage of the tray. The washing machine will have to be changed.
How to easily deal with a dirty washing machine tray without acid?
In this article we will consider this problem from all sides.
Details
Prevention
The best option is to systematically air and wipe the drum and powder compartment with a dry cloth.
But if, nevertheless, the powder tray has become dirty, plaque or mold has appeared, more thorough cleaning is required. This will take effort and time. Plastic can absorb rust and change its color.
There are “craftsmen” who use plumbing products to clean the tray. I found a couple of advice articles on the global network on how to clean the tray with Domestos. This is extremely dangerous for technology. You risk turning the tray into a sieve. Rinse it from chlorine-containing products completely will not work. 100% will remain the smell of chlorine, which will smell like washed clothes.
There are also articles on the Internet where vinegar or acetone is used for cleaning. I do not recommend using these substances. They will harm your washing machine and you. A strong unpleasant odor from vinegar is dangerous to health. Acetone can corrode plastic.
The method of cleaning using acetic acid is also not recommended.
Important! Any acid is harmful to plastic. The failure of the powder tray will force you to change the washing machine, buy a new one.
To prevent this from happening, use more gentle means.
Much safer is to empty the powder tray with hydrogen peroxide. This cheap and relatively safe tool is in every home.
Hydrogen peroxide can even cope with old pollution, has a whitening effect and will not harm plastic.
There are a lot of videos and articles on the Internet that describe this method.
Steps to Clean the Powder Tray with Hydrogen Peroxide
- Remove the tray from the washing machine. To do this, gently press the PUCH key, which is located in the tray, and pull it forward. If the design allows you to disassemble the tray, this must be done.
We will need the following inventory: a container that will fit the tray. The taz fits perfectly. Sponge, rag and old toothbrush. This is to apply the cleanser mixture to the tray.- Preparation of the cleaning mixture. In a plastic container, mix 100 ml of 3% hydrogen peroxide and 6 tbsp.baking soda. Add to this mixture a little finely planed laundry soap. You should get a creamy paste. The cleaning compound should be thick and lather.
- Applying the cleaning compound to the tray. You can use a sponge or cloth. Who is comfortable. I applied with an old toothbrush. It is necessary to distribute the mass over the entire surface and leave for 30 minutes.
- Then you need to wipe the tray with a damp cloth or sponge, rinse under running water and leave to dry.
The result is a clean, tidy laundry detergent tray. As soon as the tray is dry, you can put it back and enjoy washing.
If you have a problem with a dirty powder tray, use safe products. It depends on you how long the washing machine will last.
If this article was useful, I will be glad.
