As usual, you have turned on the LG washing machine, but suddenly an unknown code appears on the digital screen display, indicating that washing is not allowed at the moment. Are you confused? Let's see what a particular IE or 1E code signals on the display screen? Yes, the washing machine allowed the program to start, but does not respond, the water tank does not fill up, or it starts to slowly draw water, but in fact, the drum does not turn, but the motor is in perfect order.
In the LG washing machine without a screen, this error turns on and flickers the main and prewash indicators at the same time.
What does a specific IE or 1E code mean?
The IE code indicates that the LG washing machine is currently unable to draw water for the time programmed in the control unit. You can fix the problem yourself or invite a highly professional specialist to washing machine repair. Possible causes of malfunctions that require highly qualified masters, the number of which is more than one.
IE error in LG washing machine - self-repair effects, how to get the result?
- The LG washing machine very often draws water slowly when the water pressure in the water supply is low! This often happens when plumbing services turn off the water and then start connecting it. It is necessary to wait for a good pressure of water, and the question will disappear by itself.
- Perhaps the water was turned off for you, and today there is simply no water, as a result of which the washing machine does not turn on, the motor runs, but no water is drawn! Alas, it is not! Then see point 3.
- Very often, in an apartment or house, the tap is turned off or the water supply hose to the washing machine is turned off. Carry out a check and turn the shut-off valve "as far as it will go". In addition, you need to check all the hoses, perhaps in some place it is pressed through.
- Check the mesh filter for dirt! It is necessary to rinse and clean the filter mesh, you can use lemon water. Filter located at the point where the inlet hose is connected to the washing machine.
Causes of an IE or 1E error
Here we will indicate the most common causes of washing machine breakdowns and possible solutions to resolve error code 1E or IE:
| What does the washing machine indicate?
The main failure rate |
Possible breakdowns of the washing machine | What to do? Replacement or repair? |
Plain
Price repair* |
| LG car slowly picks up waterthe motor is running. | Water supply to the washing machine is not possible because the water inlet valve, which allows water to enter the washing machine, is defective. It may not work because the control unit is faulty.Sometimes, it completely stops opening, and then the water slowly seeps out and does not allow it to draw water at full power. | The inlet valve for the water supply to the washing machine needs to be replaced. | from 3500 to 45$. |
| Washing machine does not absorb water at all, water does not flow. | The water level switch has broken, it can simply burn out or wear out. | It is necessary to clean the water level switch by blowing it out. If the error code IE or 1E does not disappear, it is necessary to replace the pressure switch. | from 1900 to 39$. |
| The error code does not disappear, water is not poured. | The matrix, or rather the control unit in the form of an electronic controller, where all the microcircuits are located that allow you to control the operation of the washing machine, has failed. | If replacing a relay or a burned-out triac does not eliminate the error code, the electronic controller must be replaced. | Relay repair - from $ 3000 to $ 40. Replacing the electronic controller - 5500 - $ 65. |
So, the main reasons for the breakdown of the washing machine with an error code were identified. IE:
- There is no water in the water supply, the tap is turned off, the hose is clamped;
- The electronic controller of the washing machine is faulty;
- Faulty water inlet valve;
- The water level switch is out of order!
The table contains the FULL PRICE for fixing the problem, including the work of the master and the cost of all spare parts. For different models of the LG washing machine, the price of spare parts and the variability of their replacement may be different, which determines the exact cost of the repair. After diagnosing the required repair and the model of the LG washing machine, the master will set the Final price.
A professional master will usually be able to come to your house from the moment of the call within 24 hours and repair the washing machine! You will receive a 2-year warranty on the repairs made!
Attention! With prior approval and your consent to the repair, you will not need to pay for the arrival of the master at home and establishing the causes of malfunctions and malfunctions!
Get high-quality and affordable service in the companies of your city!
