Have you encountered the FE error on the LG washing machine display for the first time? Knowing the specific error code will allow you to identify the causes of the breakdown and troubleshoot.
This type of breakdown can occur both when rinsing things and when washing, therefore, regardless of the LG washing machine model, where there is no display, the digital screen can turn on and flicker at the same time:
- pre-wash and main wash LEDs;
- indicators of types and types of products (wool, bulky items (blanket), synthetics).
Cause of failure due to FE error in Lg
The degree of filling the tank of the washing machine with water has exceeded the established limit level.
How to solve the problem without outside help? Your actions!
- Drain the water and consider the following washing points: You have used powder expired, washed light weight items such as lace tablecloths, or loaded laundry overweight, which led to increased foam and her enhanced education.
Check for the amount of foam in the drum. If the foaming rate is exceeded, remove the items from the drum and let the washing machine dry for about a day.
- It is also necessary to completely disconnect the washing machine from the mains and plug it back into the socket after 15 minutes to check for damage in the control unit of the washing machine.
fe error repair will be required if the following causes occur:
Consider the basic methods for fixing breakdowns of an LG washing machine with an FE error code:
| What does the washing machine indicate?
The main indicator of failure! |
Possible damage to the washing machine! | What to do? Replacement or repair? |
Price
repair* |
| Code FE flickers, LG washing machine collects and drains water | The filling valve for filling the washing machine with water requires repair, and therefore, it passes water in the closed state, and leads to overflow. | If the spring of the washing machine has become thinner and weaker or the inlet valve does not prevent “excess” water due to the loss of membrane flexibility, in this case, the valve cannot be repaired, it is necessary to replace the valve. | from 3200 to 39$. |
| At the beginning of the wash, the washing machine drained the water, then stopped or constantly draws it, while the display shows the error code FE. | Broken water level sensorpressure switch), which measures the allowable water level in the washing machine. | There may be a blockage in the water pressure sensor tube. You can clean it by blowing, if this does not help, it is definitely necessary to replace the pressure sensor. | from 1900 to 39$. |
| The LG washing machine stopped during operation (washing) and the error code FE flashed on the digital screen. During the stop, the washing machine may drain water, or water may remain inside the tub. | The built-in computer program unit (microcircuit), or rather the control unit of the washing machine is faulty. | On the matrix, the tracks “burn out” or the elements of the pressure switch are broken. In this case, you can "solder" the tracks, eliminate the faulty elements of the controller. If a burn occurs on the matrix or the processor fails, it will need to be replaced. | Repair - from $ 3000 to $ 40.
Replacement - 5500 - $ 65. |
| An FE error occurred during the washing and rinsing period. When you restart the washing machine, the program displays an error code that does not allow washing to be turned on. | In the control unit of the washing machine, the wiring leading from the control unit (microcircuit or electronic controller) to the pressure switch has been erased. | From the control unit to the pressure switch, restore the damaged electrical wiring, isolate this place to protect it from a secondary break. | from 1500 to 29$. |
So, there are main types of breakdowns:
- The electrical controller is broken;
- The water level switch (sensor) is broken and needs to be replaced;
- The filling valve allows water to pass in the "closed" state;
- Damaged electrical wiring.
* In the column "Repair price» the FULL PRICE of troubleshooting is prescribed, including the work of the master and the cost of all spare parts. For different models of LG washing machine, the price of spare parts and the variability of their replacement may be different, which determines the exact cost of repair.
After diagnosis of the required repair and models of LG washing machines, the final price will be set by the master.
Have you encountered the FE error code for the first time? There is a solution!
A professional master in your city will be able to come to your house from the moment of the call within 24 hours and repair the washing machine! You will receive a 2-year warranty on the repairs made.
Attention! With prior approval and your consent to home repairs, you will not need to pay for the arrival of the master at home and establishing the cause of the malfunction and malfunction!
Get quality and affordable service!
Your washing machine will always be in working order!
